Nosač za Pi 6 – 3D štampano

Inspired by https://www.thingiverse.com/thing:2843889I used the one linked above for the Pi3, but needed an upgrade for Pi4 and decided to use a noctua 40×10 fan, as the new raspberry runs a little hotter.This can be mounted on any side of the MK4/MK4S/MK3/MK3s printer. I chose to put it under the einsy board box.The fan is mounted with screws that came in with it, and the case is held together with four m3 screws.It’s a tight fit, but works for me 🙂 Also, I forgot to add the opening for the status LEDs…When printing, flip it flat side down, this way no supports are needed.Thingiverse:https://www.thingiverse.com/thing:3901483