Zidni Nosač 9 – 3D štampano

This shelf bracket is designed to fit the Ikea Burhult shelves( https://www.ikea.com/us/en/p/burhult-shelf-white-80400042/ )But any shelf with the same dimensions will fit.The screw holes are made to fit screws with a head width of 8.5mm and thread width of 4mm.Be sure to use screw anchors so the shelf doesn’t fall off the wall.Printing 4 of these brackets uses about 1kg of filament, make sure you have enough.The dimensions of the bracket are7.9 inches(200.5mm)x 7.75 inches(196.85mm)x 0.8 inch(20.25mm There is now a Version 2 that does not need the “support brackets.” You don’t need to use 6 screws, 4 or 2 could work just fine depending on how much weight you are going to put on the shelf. Print instructionsI recommend using brim and 4 perimeters when printing.Print the brackets