Štipaljka za baštu – 3D štampano

Just a quick hanger/clip for grow tent poles (16mm, most common size). Works well for trellis support, and LST anchoring.Recommend adjusting print height and fill based on strength needs (whatever you’re tying down / supporting)These let a Phlizon Cob Series 3000W (~22lbs) hang off of it amazingly. Just make sure you print them thicc enough – adjust their print height in slicer, which is easy to do. If hanging heavy stuff, I would suggest printing with PETG and not PLA.For trellis supports, or things that don’t need huge holding power, adjust down in thiccness. A few MM thick is all you need for most applications.