Spiner za baštu 6 – 3D štampano

LAST UPDATESThe PINS are renamed.PRINT SETTINGSINFILL = 5%WALL LAYERS = 2TOP/BOTTOM LAYERS = 2SUPPORTS = NOBRIMS = NOASSEMBLYPaint the parts before assembly (DO NOT paint TABS, ROD, and ROTOR)Insert 3 small tabs into the back of the BODY partConnect the TAIL to the BODYInsert the ROTOR part into the PROP partConnect the PROP to the BODYInsert 1 large tab into the TAILConnect ELEVATORS to the TAILInsert 2 small tabs to the WINGS separatelyConnect WINGS to the BODYTie the TIE_POLE anywhere you want by using its extensionsConnect the whole assembly to the TIE_POLESUGGESTIONSPlease leave a reviewYou may print all the parts at the same time, it needs at least 200x200mm print bedYou may use a different pole with a 3mm or 4mm diameterYou may use the simple pole and zip ties insteadYou may use sup