Saksija za cvijeće 14 – 3D štampano

There are many self-watering planters but I wanted one you can print in Vase Mode.It should be faster, use less material and still be water-tight.Use Spiral Vase or whatever it’s called in your Slic3r.Extrusion width should be 0.7mm+ with 0.4mm nozzle, otherwise, you get a slinky like in one of the images.I print with PLA(+?) at 220 Temp for the outer to be more water-tight.Post print you need to poke holes in the bottom part of the inner part. use a hot stick or drill or any other poking method.When I use a good PLA I manage to get it water-tight from the printer, but with a lousy PLA, I coat the inside (mostly the connection between the walls and the floor) with candle wax. only the outer part needs to be water-tight. don’t use materials that are toxic to plants!I used 0.3mm layer height