Praznični ukras 17 – 3D štampano
Praznici i ukrasi

Praznični ukras 17 – 3D štampano

These cookie cutters are easy to print and easy to use. They should be in the correct orientation for printing already. All the cutters included in this set are

Cijena na upit Javi se — dogovorimo boju, veličinu i rok.
Naruči u DM Pošalji upit
  • 🎨 Boja po tvom izboru
  • 📐 Veličina po dogovoru
  • 🐧 Štampamo po porudžbini
  • 📦 Dostava širom Crne Gore

Dizajn: sescobar

These cookie cutters are easy to print and easy to use. They should be in the correct orientation for printing already. All the cutters included in this set are 3.5 inches (88.9mm) across their longest dimension.I typically print cutters at 0.2mm layer height with the seam position set to either aligned or rear, but default settings are fine. If you need to print your cutters faster, you can print at 0.3mm layer height, but make sure that you enable “detect thin walls” and check the print preview first to ensure there will not be any missing sections.

Slično iz ponude