Podesivi Nosač za grafičku – 3D štampano

IntroductionThis is a very quick print that will support the heavy, loose end of your PC graphics card. I have made two versions, a shorter, 50mm stand and a taller 60mm stand.The stand uses an M3 bolt to allow adjustment. In my case, it is a 30mm bolt to allow for plenty of height adjustment. A Magnet is also inserted into the print to help hold the stand in place.You will NeedYou will need an M3 bolt, at least 10mm but can be as long as you need it to be. It would be wise to measure the height of the space between the GPU and the bottom of your case first. Then decide if you need the 50mm or 60mm stand. Remember the adjustment bolt will add 11mm(ish) on top. Choose a bolt length longer than you need, most of it will be inside the print.You will need an M3 x 5mm threaded insert. This will