Nosač LED – 3D štampano
Elektronika i DIY

Nosač LED – 3D štampano

This LED Strip Mount is based on two parts which can be connected to reach a total length of 400mm. I used Prusament PETG and wouldn't recommend PLA (believe me

Cijena na upit Javi se — dogovorimo boju, veličinu i rok.
Naruči u DM Pošalji upit
  • 🎨 Boja po tvom izboru
  • 📐 Veličina po dogovoru
  • 🐧 Štampamo po porudžbini
  • 📦 Dostava širom Crne Gore

Dizajn: UnclePete-Designs

This LED Strip Mount is based on two parts which can be connected to reach a total length of 400mm. I used Prusament PETG and wouldn’t recommend PLA (believe me I tried and the 24V Strips I used get a little too warm for a longterm use).
After I sticked both parts together, I used double sided tape on the back and sticked them to the top. Afterwards I used 3mm screws to make sure nothing will come apart.
Print instructionsI used the standard Prusament PETG settings in PrusaSlicer (no support and 15% Infill)

Slično iz ponude