Kućište nosač 3 – 3D štampano
Računari i gejming

Kućište nosač 3 – 3D štampano

Case for a Raspberry Pi 4FeaturesVESA mount (75mm x 75mm)Internal fan mount (40mm x 40mm x10) - optionalThread inserts (case and pi mounts)Footer pins - optiona

Cijena na upit Javi se — dogovorimo boju, veličinu i rok.
Naruči u DM Pošalji upit
  • 🎨 Boja po tvom izboru
  • 📐 Veličina po dogovoru
  • 🐧 Štampamo po porudžbini
  • 📦 Dostava širom Crne Gore

Dizajn: RonnyS

Case for a Raspberry Pi 4FeaturesVESA mount (75mm x 75mm)Internal fan mount (40mm x 40mm x10) – optionalThread inserts (case and pi mounts)Footer pins – optionalRequired partsRaspberry Pi 4Optional partsFan 40x40x10, 5V → Noctua NF-A4x10 5V incl. anti-vibration mounts4x Anti-vibration mounts (See fan)2x 1P Single Dupont connectorsMount case4x M3 thread inserts → Ruthex RX-M3x5.74x Cylindrical head screw M3 x 16mmMount Raspberry Pi / fan4x M2.5 thread inserts → Ruthex RX-M2.5×5.74x Cylindrical head screw M2.5 x 16mmOptional M3 thread inserts and screws can be used. Attention the mounting holes on the Raspberry Pi must be redrilled.GPIO pinout fanFan red cable (Positive pole)100% fan speed: 5V power pin e.g. GPIO 2Reduced fan speed: 3V3 power pin e.g. GPIO 1Fan black cable (Negative pole)Gro

Slično iz ponude