Igračka 14 – 3D štampano

This is my take on a fidget toy I saw online. It is easy to print, even with bad printers, requires no support and works without lubrication.Parts list:15 chain links (can be printed together or individually)A 10-tooth sprocket with rotating bearing (print-in-place)A 7-tooth sprocket with rotating bearing (print-in-place)2 chain spinner arms2 large caps2 small capsPrint Instructions:Every part should be printed without supports.There are TWO different clearances for the sprockets, 0.225 in and 0.15 inches. The large clearance should work for all printers.The arms have a slight raised edges around the holes on one side so make sure that it is printed in the correct orientation. Post- Processing and Assembly:Note: The chains may require some light sanding to get it to move freelyAssembl