Figura 17 – 3D štampano

This fidget toy that can be rotated with one hand unconsciously. The click feeling of the “Fidget Clicking Wheel 2.0” is retained in a smaller size.Print Settings:Material: PLA, PETGLayer height: 0.15 – 0.20mmSupports: noPerimeters: 2Assembly: 0. print a total of 4 parts: ‘Case_M’, ‘Case_F’, ‘SpringFrame’ and ‘Wheel_20T’.  1. Put the ‘Wheel_20T’ onto the ‘case_M’ part and check its rotation. if rotation feels stiff, use a file to trim as necessary.  3. Snap-on the opposite side of the ‘case_F’.   Note:In my case with slicer, layer heights above 0.28mm, the spring clearance lost are do not function.Do not use Matte PLA, Silk PLA, as they have weak layer adhesion and can break with snap-on.If you remove the printed parts from the build sheet while they