Držač za bar 6 – 3D štampano

Fire Demon Can Holder (two types)Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8-10%gyroid, Automatic Tree supports (at least 26°), block supports inside the mouth – behind the teeth.Be careful with the supports, remove them very carefully in the area of the teeth. I recommend using small pliers.#1                  #2                  Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the