Držač Gridfinity 16 – 3D štampano

OverviewThe Gridfinity box is intended to hold any M6 nozzles. There are options for stackable and non stackable and also options for internal or external magnets. Printing InstructionsPrint in low infill (5-15%) and high layer height (0.2-0.32mm). External magnetsIf you printed the external magnets model 4x 6x2mm magnets can be glued in their holes at the bottom of the print after the print is complete. Internal magnetsTo get the magnets inside of the internal magnets print, either pause the print when the walls of the magnets holes are a a sufficient height so the extruder won’t collide with them and place 4x 6×2 or 6×3 magnets in the holes. (A dot of CA glue in each hole can prevent them from rattling).Alternatively, in the slicer you can add a pause at a chosen layer. To