Dodatak za računar 36 – 3D štampano

I couldn’t find a cable comb that suited my taste, so I designed it.Print settings: Filament: PETG (I recommend against using PLA due to its potential for deformation caused by heat.)Layer height: 0.2mmSupports: noPerimeters: 3Notes:Be careful to the seam position being visible from the front, as it will spoil the otherwise nice appearance :(I recommended to print only one piece to check the size first.Scale size tips:Commonly retailed cables, awg 18 wire with 3mm sleeves do not need to be rescaled, just print as is. (Please adjust scale if you needed)         If you have a custom sleeved cable using awg 16 wire with 4mm sleeves, please adjust the scale to ±106%.             &